lead-free parts pb ligitek electronics co.,ltd. property of ligitek only data sheet L12URF9653S-30D-AM square with 4leads type led lamps doc. no : qw0905-L12URF9653S-30D-AM-b01 rev. : a date : 09 - sep.- 2008
cathode c1.25 r0.7 anode 1.5 7.62 -30
625 luminous flux @70ma(lm) forward voltage @70ma(v) part no. L12URF9653S-30D-AM v 2000 esd electrostatic discharge( * ) * static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. min. ligitek electronics co.,ltd. property of ligitek only unit urf(s) ratings page 2/5 symbol parameter absolute maximum ratings at ta=25 ?
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( ? ? ?
60 seconds max note: 1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. page 4/5 2.wave soldering profile ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350
mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 1.t.sol=260 ??
|
